• Rophoria

  dosage of Rophoria depends on climate, crop and aphid density and should always be adjusted to the particular situation. Start introduction preventatively, or [...] rates typically range from 200-600 pupae per ha/release. Releases should be repeated a number of times. Consult a Koppert advisor or recognised distributor [...] receipt Apply as soon as possible after receipt. If necessary, the product can be stored for 1-2 days Storage temperature 8-10°C/47-50°F Storage conditions

• Eretmocerus eremicus

  Releases should be repeated at least 3 times at weekly intervals or until control is achieved. Depending on the specific situation, it may be better to switch [...] or Enermix depends on climate, crop and whitefly density and should always be adjusted to the particular situation. Start introduction preventively soon [...] Eretmocerus eremicus , the 24 hour average greenhouse temperature needs to be at least 20°C/68°F. Eretmocerus eremicus is still active at temperatures above

• Natutec Drive

  the crop. The Natutec Drive can be customised based on the specifications of the greenhouse or field and can therefore be used in many different crops. Mode [...] metres, depending on the device. Application Fill the drum with the product to be released Place the drum inside the Natutec Drive Choose the speed based on

• Tree specialist Wolterinck: Control of oak processionary caterpillar with Entonem

  preferred method over products based on Bacillus thuringiensis , which can only be used on trees with leaves. Nematodes are a better solution for urban areas [...] nematodes when the caterpillar egg casings begin to emerge. A second spraying may be needed, either of nematodes or of nematodes plus Bacillus thuringiensis -based

• Syrphidend

  of Syrphidend depends on climate, crop and aphid density and should always be adjusted to the particular situation. Start introduction preventatively or [...] rates typically range from 100-600 pupae per ha/release. Releases should be repeated a number of times. Consult a Koppert advisor or recognised distributor [...] receipt Apply as soon as possible after receipt. If necessary, the product can be stored for 1-2 days. Storage temperature 8-10°C/47-50°F. Storage conditions

• Thripex-V

  on points per hectare, evenly distributed over the total surface Can also be applied with Natutec Airobreez , Natutec Mini-Airbug , Natutec Airbug or Natutec [...] dosage of Thripex-V depends on climate, crop and pest density and should always be adjusted to the particular situation. Start introduction as soon as the first [...] Introduction rates typically range from 50-500 per m 2 /release. Releases should be repeated if necessary. Consult a Koppert advisor or a recognised distributor

• Aphipar-M

  of Aphipar-M depends on climate, crop and aphid density and should always be adjusted to the particular situation. Start introduction preventively soon [...] Introduction rates typically range from 0.25-4 per m 2 /release. Releases should be repeated at least 3 times. Consult a Koppert advisor or a recognised distributor [...] Effectivity is reduced at temperatures above 28°C/82°F). Combined use Can be used in combination with other aphid biocontrol agents, such as Aphidend

• Aphilin

  dosage of Aphilin depends on climate, crop and aphid density and should always be adjusted to the particular situation. Start introduction preventively soon [...] Introduction rates typically range from 0.25-4 per m 2 /release. Releases should be repeated a number of times. Consult a Koppert advisor or a recognised distributor [...] Aphidius species at high temperatures (above 28°C/82°F). Combined use Can be used in combination with other aphid biocontrol agents, such as Aphidend

• Spidend

  Should be used in combination with Spidex Vital . Storage time after receipt Apply as soon as possible after receipt. If necessary, the product can be stored [...] Spidend depends on climate, crop and spider mite density and should always be adjusted to the particular situation. Start introduction as soon as the first [...] Introduction rates typically range from 0.25-25 per m 2 /release. Releases should be repeated at least 3 times at weekly intervals, or until the pest is controlled

• Spical-Plus

  of Spical-Plus depends on climate, crop and pest density and should always be adjusted to the particular situation. Start introduction preventively or as [...] 000 sachets per ha and hang them evenly spaced in the crop. Release should be repeated after 4 weeks if the pest is not controlled. Consult a Koppert advisor [...] and 90°F) and is sensitive to relative humidity below 60%. Combined use Can be combined with Phytoseiulus persimilis and Feltiella acarisuga . Storage time