How it works
|Pack size||500 nymphs.|
|Presentation||100 ml bottle.|
|Carrier||Wood chips and buckwheat hulls.|
Directions for use
- Sprinkle material directly in the hotspots on leaves or in Diboxes
- Spread material thinly (maximum 1 cm thick) to enable the predatory bugs to get out of the carrier material
- Make sure the material is not disturbed for at least a few hours after application
The dosage of Mirical-N depends on climate, crop and pest density and should always be adjusted to the particular situation. Use for control of hotspots. Introduction rates typically range from 10-50 per m2/release. Releases should be repeated al least two times. Consult a Koppert advisor or a recognized distributor of Koppert products for advice on the best strategy for your situation.
Optimal temperatures for Mirical are above 20°C/68°F, lower temperatures slow down the development of Macrolophus pygmaeus significantly.
For effective control of spider mite use Mirical-N in combination with Spidex.
Pesticides can have (in)direct effects on biological solutions. Find out which pesticides have side effects on this product.
Storage time after receipt
In the dark, bottle horizontally.
"The general conditions of Koppert (Koppert B.V. and/or of its affiliated companies) apply. Only use products that are permitted in your country/state and crop. Always comply with the conditions specified in local product registrations. Koppert cannot be held liable for unauthorized use. Koppert is not liable for any loss of quality if the product is stored for longer than recommended and/or under incorrect conditions."