Larvanem

nozzle opening should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent [...] sprayer, or a vehicle-mounted spray unit To avoid blockage, all filters should be removed, especially if finer than 0.3 mm (50 mesh) Use a maximum pressure

Pollination checklist tomato

high for a lengthy period, the hive and the colony may suffer damage. You should therefore position the bumblebee hive in the coolest spot, or at least in [...] of side effects, on paper or via the internet, or consult an adviser. You should preferably not position more than three hives together. Ensure that the

Trianum-G

mechanical application with a granule spreader, the spreader's exit hole should be as close to the soil as possible to prevent wind blowing away the small [...] uniform application. Dosage The dosage of Trianum-G depends on the crop and should always be adjusted to the particular situation. Check the label to find

Aphidalia

The dosage of Aphidalia depends on climate and the size of the trees and should always be adjusted to the particular situation. Start introduction as soon

Orius laevigatus

The dosage of Thripor-L depends on climate, crop and thrips density and should always be adjusted to the particular situation. Start introduction as soon [...] Introduction rates typically range from 0.5-10 per m2/release. Releases should be repeated once or twice. Consult a Koppert advisor or a recognized distributor

Capirel

nozzle opening should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent [...] backpack sprayer or through a sprinkler system To avoid blockage, all filters should be removed, especially if finer than 0.3 mm (50 mesh) Use a maximum pressure

Bacterial spot

the greenhouse or field Resistant cultivars of pepper are available and should be used Prevent plant diseases by optimizing plant potential and crop resilience

Entonem

nozzle opening should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent [...] sprayer, or a vehicle-mounted spray unit To avoid blockage, all filters should be removed, especially if finer than 0.3 mm (50 mesh) Use a maximum pressure

Capsanem

nozzle opening should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent [...] sprayer, or a vehicle-mounted spray unit To avoid blockage, all filters should be removed, especially if finer than 0.3 mm (50 mesh) Use a maximum pressure

Encarsia formosa

of En-Strip or Enermix depends on climate, crop and whitefly density and should always be adjusted to the particular situation. Start introduction preventively [...] Introduction rates typically range from 1-10 per m 2 /release. Releases should be repeated until control is achieved. At increasing temperatures it may