• Mirical

  and, at the end, shake out any remaining M. pygmaeus from the tray into the crop. Hang the cardboard strips over the stalk of a fully-grown leaf at the [...] leaves. Make sure the material is not disturbed for at least a few hours Introduce in clusters of at least 50 predatory bugs Create 6-10 distribution points [...] or wood chips and buckwheat hulls (bottle). Application Introduce Mirical at the beginning of the growing season and provide Entofood and/or Artefeed as

• Encarsia formosa

  parasitic wasp Encarsia formosa is most effective at temperatures between 20°C and 25°C (68 and 77°F). At a 24 hours average temperature below 17°C/63°F the [...] whitefly ( Bemisia tabaci ) The parasitic wasp Encarsia formosa is available at Koppert as En-Strip . Encarsia formosa products En-Strip Enermix Expand all [...] if possible approximately 75 cm under the plant head Avoid to hang cards at places exposed to direct sunlight The dosage of En-Strip or Enermix depends

• Grey mould

  irrigation water) and nutrients for germination. Germination also happens at very high relative humidity (RH > 93%) on dry plants. The germ tube grows [...] maintain a higher RH once stem infection is present, since more plants die at lower RH remove aborting fruits, since these can be infected after abortion

• Horiver Rollertrap

  other lengths on request Presentation Make sure that the Rollertraps are at least at room temperature before placing them. The glue will be softer and the [...] pest pressure is expected, such as along gables, near ventilation windows and at (other) places with dry conditions Rollertrap should be hung above the crop [...] of the roll which will allow the Rollertrap to spin freely while unrolling At the beginning and end of each run, cut the trap approximately 40 cm longer

• European red mite

  The development from egg to adult goes faster at higher temperatures and takes approximately two weeks at 21°C; therefore there can be many generations [...] and oval shaped with white hairs on their back and white spots (tubercles) at the base of the hairs; males are about 0.3 mm long, yellowish red, and more

• Scia-Rid

  from the box and keep them at room temperature for 30 minutes Empty the contents of the sachets into a bucket containing at least 2 litres of water per [...] pressure of 20 bar/290 psi (on nozzle) The spray nozzle opening should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle [...] timeframe. Do not store mixed suspensions Dosage Scia-Rid is typically applied at a rate of 2,000,000 nematodes per m². Timing Apply during the last irrigation

• Neoseiulus californicus

  typically range from 25-125 per m2/release. Releases should be repeated at least five times at weekly intervals. Consult a Koppert advisor or a recognized distributor [...] for use of Neoseiulus californicus Neoseiulus californicus is most effective at temperatures between 13 and 32°C (55 and 90°F) and is sensitive to relative [...] sprinkle material on leaves Make sure the material remains on the leaves for at least a few hours after introduction Can also be applied with (Mini)-Air(o)bug

• Amblyseius swirskii

  Amblyseius swirskii is most effective at temperatures between 20 and 32°C (68 and 90°F). It is not effective at temperatures below 18°C/64°F. Amblyseius [...] of thrips and young eggs, crawlers and second instar larvae of whiteflies. At 25°C under optimal conditions, an adult female Amblyseius swirskii lays 2 [...] pour into Diboxes Make sure the material remains on the introduction site for at least a few hours after introduction Can also be applied with (Mini)-Air(o)bug

• Sportnem-H

  from the box and keep them at room temperature for 30 minutes Empty the contents of the sachets into a bucket containing at least 2 litres of water per [...] required amount of water If tank mixing with a compatible product, add Sportnem-H at the end to a fully filled tank Apply directly after preparation of spray solution [...] pressure of 20 bar/290 psi (on nozzle) The spray nozzle opening should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle

• Capirel

  from the box and keep them at room temperature for 30 minutes Empty the contents of the sachets into a bucket containing at least 2 litres of water per [...] required amount of water If tank mixing with a compatible product, add Capirel at the end to a fully filled tank Apply directly after preparation of spray solution [...] pressure of 20 bar/290 psi (on nozzle) The spray nozzle opening should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle