• Citripar

  range from 0.1-0.5 per m 2 /release. Releases should be repeated at least 3 times at an interval of 1-2 weeks. Consult a Koppert advisor or a recognised

• Amblyseius andersoni

  of Western Flower Thrips ( Frankliniella occidentalis ) per day and lays 2.3 eggs per day. Life cycle of Amblyseius andersoni Mobile stages are beige, [...] typically range from 50-250 per m2/release. Releases should be repeated at least 3 times at weekly intervals or until control is achieved. Consult a Koppert advisor

• Anso-Mite

  typically range from 50-250 per m 2 /release. Releases should be repeated at least 3 times at weekly intervals or until control is achieved. Consult a Koppert advisor

• Entomite-M

  Pack size 10,000; 50,000; 125 000 predatory mites . Presentation 0.9 litre; 3.6 litre cardboard cylinders. Carrier Sphagnum spp. moss. Application Turn and

• Long-tailed mealybug

  of the other filaments is roughly half the width of the body. The female is 3 - 4 mm long. Reproduction in Pseudococcus longispinus , may be sexual or asexual

• Tobacco aphid

  times the body length, reaching to the siphunculi. The body length is 1.2-2.3 mm.

• Horiver Rollertrap

  local Koppert representative or distributor Dosage One Rollertrap per 1 to 3 plant rows. Timing In high crops Rollertraps should preferably be installed

• En-Strip

  pupae become brownish. Adult wasps leave the pupae via a round hole. Pack size 3,000; 7,500; 15,000 pupae. Presentation Cardboard strips with 5 cards each,

• Larvanem

  of 250 million in a box. Developmental stage Infective third-stage larvae (L3). Concentration 86% Heterorhabditis bacteriophora – 14% inert biodegradable [...] avoid blockage, all filters should be removed, especially if finer than 0.3 mm (50 mesh) Use a maximum pressure of 20 bar/290 psi (on nozzle) The spray

• Sportnem-H

  of 250 million in a box. Developmental stage Infective third-stage larvae (L3). Concentration 86% Heterorhabditis bacteriophora – 14% inert biodegradable [...] avoid blockage, all filters should be removed, especially if finer than 0.3 mm (50 mesh) Use a maximum pressure of 20 bar/290 psi (on nozzle) The spray