Anagyrus vladimiri

The dosage of Citripar depends on climate, crop and mealybug density and should always be adjusted to the particular situation. Start introduction preventively [...] Introduction rates typically range from 0.1-0.5 per m 2 /release. Releases should be repeated at least 3 times at an interval of 1-2 weeks. Consult a Koppert [...] can occur is 13°C/55°F; the highest temperature is 38°C/100°F. Citripar should be combined with Cryptobug or Cryptobug-L for effective control of the mealybugs

Spidex Vital

dosage of Spidex Vital depends on climate, crop and spider mite density and should always be adjusted to the particular situation. Start introduction as soon [...] crop. Introduction rates typically range from 2-50 per m2/release. Releases should be repeated once or twice at weekly intervals. Consult a Koppert advisor

Steinernema feltiae

nozzle opening should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent [...] backpack sprayer or through a sprinkler system To avoid blockage, all filters should be removed, especially if finer than 0.3 mm (50 mesh) Use a maximum pressure

Heterorhabditis bacteriophora

nozzle opening should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent [...] sprayer, or a vehicle-mounted spray unit To avoid blockage, all filters should be removed, especially if finer than 0.3 mm (50 mesh) Use a maximum pressure

Ervipar

Dosage The dosage of Ervipar depends on climate, crop and aphid density and should always be adjusted to the particular situation. Start introduction preventively [...] Introduction rates typically range from 0.25-2 per m 2 /release. Releases should be repeated weekly during the period when aphid infestation is expected

Aphipar-M

Dosage The dosage of Aphipar-M depends on climate, crop and aphid density and should always be adjusted to the particular situation. Start introduction preventively [...] Introduction rates typically range from 0.25-4 per m 2 /release. Releases should be repeated at least 3 times. Consult a Koppert advisor or a recognized

Swirski-Mite Plus

dosage of Swirski-Mite Plus depends on climate, crop and pest density and should always be adjusted to the particular situation. Start introduction preventively [...] least 4,000 sachets per ha and hang them evenly spaced in the crop. Release should be repeated after 4 weeks if the pest is not controlled. Consult a Koppert

Thripex-Plus

The dosage of Thripex-Plus depends on climate, crop and pest density and should always be adjusted to the particular situation. Start introduction preventively [...] least 4,000 sachets per ha and hang them evenly spaced in the crop. Release should be repeated after 4 weeks if the pest is not controlled. Consult a Koppert

Spical

Dosage The dosage of Spical depends on climate, crop and pest density and should always be adjusted to the particular situation. Start introduction as soon [...] Introduction rates typically range from 25-125 per m 2 /release. Releases should be repeated at least five times at weekly intervals. Consult a Koppert advisor

Entomite-M

Entomite-M depends on climate, crop, planting medium and pest density and should always be adjusted to the particular situation. Start introduction preventively [...] use of Entomite-M is 15°C/59°F. Combined use For thrips control Entomite-M should be combined with generalist predatory mites ( Amblydromalus limonicus ,